OUR PRODUCTS
PCB Mfg Aids | Composite Tubing | Potting Forms | Structural
Coil Bobbins | Custom Molding | Steel Die Cutting
Coil Bobbins
For prototypes and pilot runs where quality runs!
Open Stock Tooling
Glass Epoxy - Class 155C
Core sections are cut from 18" tubes molded on any of our thousands of mandrels and sandblasted outside. Flanges are fabricated from sanded G11 sheet stock for a tap-on fit over ends of the core tube and bonded flush with the ends.
|
Bonded Construction
Glass Silicone - Class 180C
Glass Polyimide 240C
Core sections are cut from 18" tubes molded on any of our thousands of mandrels and sandblasted outside. Flanges are fabricated from sheet stock, sanded both sides, and fitted over the ends of the core tube with a small offset for bonding on both sides.
|
Select your inside core size from our Mandrel List and specify thickness and legnth of the core - then tell us the outside size of the flanges we will quote prices.
Notches or lead holes can be put in the flanges - outside corners can be radiused - multi-flange bobbines can be made.